" True Value " 3 Star plus classic mattress & wooden divan base.

Inner Spring Unit (Bonnel shape offset coil) - constructed of traverse rows of 2.2mm, 5 turns Bonnell type coils, 140-150mm high, connected to a 1.4mm helical at right angles to the long axis of the unit. These special coils are made of 86mm dia. twice tempered high carbon steel wire.  Each coil is connected by the high carbon steel helical with a twin tie and helical ends are mechanically crushed at each termination point to prevent spin-out.

• Steel spring-wires are as per standard equivalent to BS4637/BS5750.

• Spring is coiled after tempering as per BS3173 revised.

Border Wire - to provide additional support to the edge of the spring unit, an oil tempered 3.67mm border wire of high carbon steel is secured to the outer-edge on both side of the units.  This also helps holding units firmly together and maintaining the shape longer.

"M" spring - 12 nos. of "M" side/edge and corner spring of 3.65mm twice oil tempered steel wire is used in a single mattress to provide addition reinforcement.

Comfort System - Consist of :

a) Polypropylene wire insulator

b) 20mm medium density polyurethane foam-deep quilting.

c) 10mm rubberized coir/natural fiber.

d) 10mm high density rebonded foam.

e) 10mm foam/fabric border quilting.

Quilting - multi-needle chain stitching deep quilting with different designs for selection.

Covering - automatic machine covering/tape edging.

Ticking - fire rated or equivalent woven fabric.  Polyester/glazed cotton/jacquard.  Conforms to BS7177 standard.  Commonly used special hotel quality F.R. Albergo fabric is of 62% cotton and 38% polyester weighs about 380 gms/mm.

Handles - four handles are provided two on each side of the mattress.

Identification - each models will have labels of " Duromat " on the corner and turn labels to achieve optimum life, comfort and durability.  Also name of the model with quality recognizable by number of stars sign is given.